DYNA® GG Grease and Grime Remover is a powerful degreaser capable of removing the toughest stains caused by grease, oil and organic deposits from concrete and clay pavers. It will dissolve and emulsify the oils and grease, allowing easy rinsing with water. It is readily biodegradable and harmless for the surrounding vegetation. Use it also on metals, fiberglass, granite, marble and natural stones.
DYNA® GG Grease and Grime Remover is part of our latest generation of products that are safer for our environment.


- Removes motor oil stains
- Removes BBQ grease stains and degreases your BBQ
- Harmless for surrounding vegetation
- Water Based Formulation
- Not corrosive, even on metals
- Compatible with most surfaces
- Readily Biodegradable
- Extremely versatile Grease and Oil remover


It can be used on a vast majority of surfaces such as concrete, masonry, natural stones, clay, plastic, fiberglass, metals, steel, aluminum, glass and etc...

SECTIONS     -    030000   /   030130.51   /   030150.51   /   090160.91


Wear adequate protective clothing, safety glasses and chemical resistant gloves. On a sealed surface wet your stains before applying GG Grease and Grime Remover. On a bare surface apply directly on your stains.


Apply cleaner generously on the stain. Scrub immediately. Reapply product, scrub again and rinse thoroughly until all suds have disappeared.


- After degreasing the stains, some oils such as transmission fluids and brake fluids can mark the surface permanently and will be difficult to remove. Use DYNA® GR Graffiti Remover to reduce or eliminate these non-greasy deposits left on the surface.
- Some deeper oil stains that have penetrated the material may resurface within the next day. If so, repeat the application one more time.


Ground and Maritime freight are not regulated for this product.


DYNA® GG Grease and Grime Remover is available in plastic containers of 1.0L (1 US Quart) and in 18.9L (5 US gal).


Store DYNA® GG Grease and Grime Remover in its original container at temperatures between 10°C and 25°C (50°F to 75°F) in a dry shaded area. The shelf life of this product is 3 years.


CAUTION. MAY IRRITATE EYES. MAY IRRITATE SKIN. Do not mix with strong acids. Do not get in eyes. Do not get on skin or clothing. KEEP OUT OF REACH OF CHILDREN. FIRST AID TREATMENT. Contains sodium hydroxide and sodium metasilicate. If swallowed, call a Poison control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. Material Safety Data Sheet available.


DYNA shall not be liable for incidental and consequential damages, indirectly or directly sustained, nor for any loss by application of these goods not in accordance with the printed instructions or for other than the intended use. Before using the user shall determine the suitability of the product for its intended use and the user will assume all risks and liabilities that may arise in connection therewith. DYNA’s liability is expressly limited to the replacement of defective goods. Any claim shall be deemed waived unless the claim is made in writing to DYNA within 30 days
from the date it was, or reasonably should have been,
discovered that the product was defective.


This premium quality product was designed to satisfy the user. If you are not satisfied after Surface Testing on a small area, please contact our technical service department immediately.
NO WARRANTIES expressed or implied are offered by DYNA. The Manufacturer’s liability is limited to the replacement of products proven defective.
The user assumes all risks and liabilities associated with the use of this product.


Phosphoric and hydrochloric acids in solution. 
Class: 8 (9.2)
UN Number: 1805
Packing Group: III

Product Performance

Test Procedure Typical Values Obtained
Colour Green liquid
Odour Aquamarine
Biodegradability 100%
Flash Point None
Specific Gravity 1.05 - 1.15
PH 11 - 12
Water Solubility Excellent