GR Graffiti Remover is an extremely versatile cleaner specially designed to remove graffiti and stains from concrete and other surfaces. Its gel consistency allows for easy removal of stains on vertical and horizontal surfaces. It is the best cleaner to use when you are faced with an unknown tough stain. Readily biodegradable and non corrosive, DYNA® GR Graffiti Remover is part of our latest generation of products that are safer for our environment.
FEATURES & ADVANTAGES
- Cleans paint over sprays
- Removes stains caused by permanent markers
- Evaporates slowly for better workability.
- Its gel formula allows easy cleaning of vertical surfaces.
- Contains no CFCs.
- Not corrosive even on metals
- Compatible with most surfaces
- Readily Biodegradable
- Low toxicity
It can be used on a vast majority of surfaces such as concrete, masonry, clay, plastic, fiberglass, wood, metals, steel, copper, aluminum, glass and even painted surfaces.
SECTIONS - 040100 / 040120.52 / 040140.52
A. SURFACE TESTING
Before using the product, always perform a surface test by applying the product on a small inconspicuous area and follow the application instructions. If you are satisfied with the results and if no surface degradation occurs, proceed with the work.
Note: Some types of paints and coatings may degrade in contact with the product. Always perform a test before using at large.
B. APPLICATION PROCEDURE
1. Wear adequate protective clothing, safety glasses and chemical resistant gloves
2. Apply GR Graffiti Remover directly on your stains. Let it sit for about 3 to 5 minutes on the stains without the product drying. Apply more if the product is starting to dry.
3. Using a small brush or a scrub pad, quickly work the product into the stain.
4. Using a pressure washe
Ground and Maritime freight are not regulated for this product.
DYNA® GR Graffiti Remover is available in metal containers of 0.946L (1 US Quart) and in 18.9L (5 US gal).
Store DYNA® GR Graffiti Remover in its original container at temperatures between 10°C and 25°C (50°F to 75°F) in a dry area. The shelf life of this product is 3 years or less.
CAUTION. MAY IRRITATE EYES. MAY IRRITATE SKIN. Do not mix with strong acids. Do not get in eyes. Do not get on skin or clothing. FIRST AID TREATMENT. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. Material Safety Data Sheet available.
DYNA shall not be liable for incidental and consequential damages, indirectly or directly sustained, nor for any loss by application of these goods not in accordance with the printed instructions or for other than the intended use. Before using the user shall determine the suitability of the product for its intended use and the user will assume all risks and liabilities that may arise in connection therewith. DYNA’s liability is expressly limited to the replacement of defective goods. Any claim shall be deemed waived unless the claim is made in writing to DYNA within 30 days
This premium quality product was designed to satisfy the user. If you are not satisfied after Surface Testing on a small area, please contact our technical service department immediately.
NO WARRANTIES expressed or implied are offered by DYNA. The Manufacturer’s liability is limited to the replacement of products proven defective.
The user assumes all risks and liabilities associated with the use of this product.
|Test Procedure||Typical Values Obtained|
|Flash Point||> 37.8°C (100°F)|
|Specific Gravity||0.95 - 1.05|
|PH||10 - 11|