OPTIMATRIX | Polymeric Sand (No Haze / Stain Free / Quick Setting)

 

OPTIMATRIX Polymeric Jointing Sand is a dry mixture of calibrated sands, polymers, binders and dedicated chemical controlling agents specifically designed to bind firmly and easily together in horizontal pavement joints. Applied dry into the pavement joints, it will harden and stay in place after activation. It sets in minutes after being activated with water, which ensures a proper installation even when the weather calls for early rain. Carefully blended with dedicated control agents, the quality of OPTIMATRIX Polymeric Jointing Sand ensures increased stability, performance and lasting durability to your paver projects. OPTIMATRIX Polymeric Jointing Sand retains adequate elasticity needed to adapt to the movements of the pavement surface. It is resistant to erosion due to weather, maintenance, and traffic. It features EZ Sweep technology to ensure no haze is produced on your pavement surface and that the sand is more easily swept in, saving you both time and money in the process. Unlike conventional polymeric sand that requires 3 wetting applications, OPTIMATRIX requires a single wetting, saving you further time. Available in Granite Grey, Quartz Beige, Beach Buff, Terra Cotta or Jet Black.

Watch Instructional Video


RJ | Polymeric Sand (For Regular Joints)

 

Carefully blended with higher content of polymers and dedicated control agents; the quality of Dynamatrix RJ Polymeric Jointing Sand ensures increased stability, performance and lasting durability. Ideal for Pavement Joints up to 1.6cm (5/8”) RJ Polymeric Jointing Sand will resist erosion due to weather, maintenance and traffic. Available in Grey, Brown, Beach Buff, Terra Cotta or Jet Black.

Watch Instructional Video


WJ | Polymeric Sand (For Wide Joints)

 

Carefully blended with higher content of polymers and dedicated control agents; the quality of Dynamatrix WJ Polymeric Jointing Sand ensures increased stability, performance and lasting durability. Ideal for Pavement Joints up to 3.2cm (1-1/4”) WJ Polymeric Jointing Sand will resist erosion due to weather, maintenance and traffic. Available in Grey or Brown.

Watch Instructional Video

HB-1 Product Image 18L
HB-1 | Protective Sealant (Gloss Finish / Wet Look)

 

Dynamatrix® HB1 Protective Sealant for Interlocking Pavers and Slabs is a high end solvent based Acrylic Sealant, it penetrates deeply into the unsealed substrate for maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear wet (glossy) look finish. Carefully blended with thermoplastic resins and refined solvents, Dynamatrix® HB1 Protective Sealant is suitable for use in all weather conditions.

 


 

HB-2 Product Image 18L
HB-2 | Protective Sealant (Satin Finish / Wet Look)

 

Dynamatrix® HB2 Protective Sealant for Interlocking Pavers and Slabs is a high end solvent based Acrylic Sealant designed to protect and enhance the look of Interlocking Concrete Pavers and Slabs. It penetrates deeply into the substrate for a maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear satin look finish. Carefully blended with thermoplastic resins and refined solvents, Dynamatrix® HB2 Protective Sealant is suitable for use in all weather conditions.

 


 

PS-1 Product Image 18L
PS-1 | Penetrating Sealant (Invisible Finish / Non-Film-Forming)

 

Dynamatrix® PS-1 Penetrating Sealant is a clear and transparent sealer formulated to protect against stains, dust, dirt, water, acid rain, chemical attack, fungus, salts, UV rays, and efflorescence damage. For interior and exterior uses (UV stable), it can be applied on colored porous concrete surfaces; Interlocking Concrete Pavers, Stamped Concrete, Cementious Surfaces, Terrazzo Floors, Masonry Brick, Stucco and grout joints.

 


 

WB-1 18L Product Image 2
WB-1 | Water Based Protective Sealant (Gloss Finish / Wet Look)

 

Dynamatrix® WB-1 Sealant For Pavers and Slabs is a high end water based Acrylic Sealant specifically designed to protect and enhance the look of Interlocking Concrete Pavers and Slabs. It penetrates deeply into the substrate for a maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear wet look finish. Carefully blended with thermoplastic resins, Dynamatrix® WB-1 Sealant is suitable for use in all weather conditions with low VOC, blush resistance and low odour.

 


 

WB-2 18L Product Image
WB-2 | Water Based Protective Sealant (Satin Finish / Wet Look)

 

Dynamatrix® WB-2 Sealant For Pavers And Slabs is a high end water based Acrylic Sealant designed to protect and enhance the look of Interlocking Concrete Pavers, Slabs, Exposed Aggregate and Terrazzo Floors. It penetrates deeply into the substrate for maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear satin look finish. Carefully blended with thermoplastic resins, Dynamatrix® WB-2 Sealant is suitable for use in all weather conditions with low VOC, blush resistance and low odour.

 


 

PW-1 | Water Based Penetrating Sealant (Invisible Finish / Non-Film-Forming)

 

PW-1 is a ready-to-use, water-based silane / siloxane water repellent for concrete, natural and dimensional stone, masonry and stucco surfaces. PW-1 permits the surface being treated to breathe. It helps prevent masonry from cracking, spalling, staining and other damage related to water intrusion. It has low odor, is alkaline stable and is ready to use. Use on horizontal surfaces such as driveways, sidewalks, tile, brick, sandstone and pavers. Provides excellent protection for retaining walls, bridge pilings and other vertical areas exposed to de-icing salts.

EF-out-right-outlined
EF | Efflorescence Cleaner

 

Dynamatrix® EF Efflorescence Cleaner is a readily biodegradable acidic based cleaner specifically designed to remove efflorescence, laitance and accumulated dirt deposits on Concrete Pavers and Slabs. It prepares the surface for Dynamatrix® Protective Sealants to better penetrate and grip the surface.







GG-out-right-outlined
GG | Grease & Grime Remover

 

Dynamatrix® GG Grease and Grime Remover is a powerful degreaser capable of removing the toughest stains caused by grease, oil and organic deposits from concrete and clay pavers. Readily biodegradable and harmless for surrounding vegetation it can be used on; metals, fiberglass, granite, marble and natural stones. Dynamatrix® GG Grease and Grime Remover is part of our latest generation of products that are safer for our environment.







GS-out-left-outlined
GS | Gum, Paint & Tar Stripper

 

Dynamatrix® GS Gum, Paint and Tar Stripper is a powerful readily biodegradable stripper capable of removing the toughest stains caused by chewing gum, tar, rubber, wax and tire marks from concrete and clay paver surfaces. It works as well on metals, bricks, granite, marble and natural stone surfaces and is part of our latest generation of products that are safer for our environment.


Watch Instructional Video




GR-out-left-outlined
GR | Graffiti Remover (Gel Formula)

 

Readily biodegradable and non corrosive, Dynamatrix® GR Graffiti Remover is part of our latest generation of products that are safer for our environment. Dynamatrix® GR Graffiti Remover is an extremely versatile cleaner containing no CFCs that removes graffiti and stains from concrete and other surfaces.

MVA Product Image
MVA | Masonry Veneer Adhesive (Pre-Mixed, Easy & Ready To Use)

 

Dynamatrix® MVA Masonry Veneer Adhesive is a pre-mixed ready to use water-based premium performing, brick multi-purpose veneer mastic for setting all types of veneer wall bricks (less than 10lbs per sq. feet) over most types of smooth surfaces. It can be used for residential and light duty industrial and commercial purposes and exceeds ANSI A136.1 Type I standards.







CMA3100
CMA | Concrete & Masonry Adhesive

 

Dynamatrix® CMA Concrete & Masonry Adhesive is a premium polyurethane concrete and masonry adhesive that is advanced, with non-sag properties, low V.O.C. compliance and is formulated to meet most demanding concrete, masonry, landscape and hardscape projects. It offers unmatched strength and durability even when bonding two non-porous materials. And provides a fast curing (24hrs or less) permanent bond for interior or exterior residential, commercial or industrial projects.

mvm9500-BAG-outlined-reflection 2
MVM 910 | Masonry Veneer Mortar

 

Dyna MVM is designed for installation of masonry veneer, natural and architectural stone. Dyna MVM Masonry Veneer Mortar is part of DYNA’s specially designed Masonry veneer System. Combined with Aquaban 200 and Dynacoat 100 it offers superior moisture protection.