8010 STONE SOAP Product PictureSTONE SOAP 8010 | Concentrated Neutral Detergent (For Natural & Dimensional Stone Surfaces)

 

STONE SOAP 8010 is a high performing concentrated neutral cleaner and detergent for residential, commercial, and industrial stone and tile surfaces. This product is formulated to dissolve stains, light greases, oils, and grimy build-up commonly found on floors, walls, countertops, etc. This product is neutral in pH and is formulated for daily or frequent use and will not therefore remove waxes and sealers commonly used on floors. This easy to use cleaner cleans, beautifies, and restores marble, granite, limestone, glazed and unglazed ceramic tile surfaces, clay, bricks, pavers and various cementitious surfaces. It leaves no dulling film and provides a wet look. Special additives are present which prevent natural or dimensional stone surfaces from drying out. These additives also provide an added benefit of anti-soiling properties.







8210 CERACID Product PictureCERACID 8210 | Grout Film & Limescale Remover (For Ceramic Tile)

 

CERACID 8210 is a premium performing efflorescence and grout film remover for residential, commercial, and industrial ceramic tile, clay tile, and porcelain tile installations. This product is formulated to remove grout film and efflorescence remaining after new installations. It can also be used on old installations to remove effloresence emerging from soluble calcium salts appearing on the surface.







GG-out-right-outlinedGG | Grease & Grime Remover

 

Dynamatrix® GG Grease and Grime Remover is a powerful degreaser capable of removing the toughest stains caused by grease, oil and organic deposits from concrete and clay pavers. Readily biodegradable and harmless for surrounding vegetation it can be used on; metals, fiberglass, granite, marble and natural stones. Dynamatrix® GG Grease and Grime Remover is part of our latest generation of products that are safer for our environment.

670-aeroflex-outlinedAEROFLEX 670 | Lightweight Polymer-Modified Medium-Bed and Thin-Set Mortar

 

A premium multi-purpose light weight polymer modified Portland cement mortar AEROFLEX 670 can be used in thin and medium bed applications. It provides high sag and slip resistance and twice the coverage compared to traditional thin-set mortars. For interior setting of non-vitreous, semi-vitreous and vitreous ceramic tiles, marble, granite, quarry tiles, pavers, slate, dimensional natural stone, and porcelain stoneware tile. Tiles can be set over concrete masonry, cured Portland cement mortar beds, glass mesh mortar units, gypsum board, unglazed ceramic tile, marble, clay tile, prepared existing cementitious terrazzo floors and cementitious backer unit for residential and commercial applications.

 


 

products-5210-thumb
BONDCRETE 5210 | Type I Bonding Agent

 

A premium performance bonding agent for adhering new concrete surfaces to old concrete surfaces. It is a TYPE I bonding agent and is non re-emulsifiable. It can also be used as a concrete additive to increase the bond strength, compressive strength, flexural strength, freeze/thaw resistance and abrasion resistance of the new concrete. It is non-toxic, non-flammable and has zero V.O.C.s

 


 

products-5220-thumb
DYNACRETE 5220 | Type II Bonding Agent

 

Used for adhering new concrete surfaces to old concrete surfaces. It is a premium performing TYPE II bonding agent and is non re-emulsifiable. It can also be used as a concrete additive to increase the bond strength, compressive strength, flexural strength, freeze/thaw resistance and abrasion resistance of the new concrete. It is non-toxic, non-flammable and has no VOCs.

 


 

MVA Product Image
MVA | Masonry Veneer Adhesive (Pre-Mixed, Easy & Ready To Use)

 

Dynamatrix® MVA Masonry Veneer Adhesive is a pre-mixed ready to use water-based premium performing, brick multi-purpose veneer mastic for setting all types of veneer wall bricks (less than 10lbs per sq. feet) over most types of smooth surfaces. It can be used for residential and light duty industrial and commercial purposes and exceeds ANSI A136.1 Type I standards.

 


 

products-9200-thumb
DYNAMASTIC 9200 | Type I Ceramic Floor & Wall Tile Mastic Adhesive (Premium Grade)

 

DynaMastic is a solvent-free, water-based, non-flammable premium performance Type I ceramic floor and wall tile mastic adhesive for setting all types of absorptive and non-absorptive ceramic floor and wall tiles, mosaics, etc. It is for all types of glazed and unglazed ceramic floor and wall tiles, mosaics. It can also be used for porcelain stoneware, marble, granite, slate and all natural stone tiles in residential and light duty industrial and commercial projects. It can be used on smooth interior surfaces, gypsum wallboard, cement or gypsum plaster, cement backerboard, and, smooth concrete.

WB-1 18L Product Image 2WB-1 | Water Based Protective Sealant (Gloss Finish / Wet Look)

 

Dynamatrix® WB-1 Sealant For Pavers and Slabs is a high end water based Acrylic Sealant specifically designed to protect and enhance the look of Interlocking Concrete Pavers and Slabs. It penetrates deeply into the substrate for a maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear wet look finish. Carefully blended with thermoplastic resins, Dynamatrix® WB-1 Sealant is suitable for use in all weather conditions with low VOC, blush resistance and low odour.







WB-2 18L Product ImageWB-2 | Water Based Protective Sealant (Satin Look / Matte Finish)

 

Dynamatrix® WB-2 Sealant For Pavers And Slabs is a high end water based Acrylic Sealant designed to protect and enhance the look of Interlocking Concrete Pavers, Slabs, Exposed Aggregate and Terrazzo Floors. It penetrates deeply into the substrate for maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear satin look finish. Carefully blended with thermoplastic resins, Dynamatrix® WB-2 Sealant is suitable for use in all weather conditions with low VOC, blush resistance and low odour.







Roof Guard Product Image3jpg ROOF GUARD 800 | Premium Elastomeric Roof Coating

 

Consisting of a premium multi-purpose light weight polymer modified Portland cement mortar. Roof Guard can be used in thin and medium bed applications. It provides high non-sag and non-slip resistance. Reduces building heat-gain and related costs, seals cracks, stops leaks and adds ultimate resistance to dirt and algae. Roof Guard will enhance the life cycle of the roof membrane and the building’s cooling equipment.