THERMOBOND 915 | Premium High-Temperature Refractory Mortar

 

THERMOBOND 915 is a dry pre-blended hydraulic refractory mortar and is designed for setting
masonry units in fireplaces, fire pits, and chimney applications. It provides high temperature
resistance. It provides thermal shock and temperature resistance to 2550°F (1400°C). It is
suitable for both indoor and outdoor applications.

 


 

mvm9500-BAG-outlined-reflection 2
MVM 910 | Premium Grade Polymer-Modified Masonry Veneer Mortar

 

MVM is designed for installation of masonry veneer, natural and architectural stone. MVM Masonry Veneer Mortar is part of DYNA’s specially designed Masonry veneer System. Combined with AQUABAN 200 and DYNACOAT 100 it offers superior moisture protection.

 


 

900 GBM Product Image
GBM 900 | Type N Glass Block & Masonry Mortar

 

A premium performance easy-to-use, factory controlled blend of Portland cement, sand and chemicals specifically designed for the installation of glass block and masonry.

MVA Product Image
MVA | Masonry Veneer Adhesive (Pre-Mixed, Easy, Ready To Use)

 

Dynamatrix® MVA Masonry Veneer Adhesive is a pre-mixed ready to use water-based premium performing, brick multi-purpose veneer mastic for setting all types of veneer wall bricks (less than 10lbs per sq. feet) over most types of smooth surfaces. It can be used for residential and light duty industrial and commercial purposes and exceeds ANSI A136.1 Type I standards.







CMA3100
CMA | Concrete & Masonry Adhesive

 

Dynamatrix® CMA Concrete & Masonry Adhesive is a premium polyurethane concrete and masonry adhesive that is advanced, with non-sag properties, low V.O.C. compliance and is formulated to meet most demanding concrete, masonry, landscape and hardscape projects. It offers unmatched strength and durability even when bonding two non-porous materials. And provides a fast curing (24hrs or less) permanent bond for interior or exterior residential, commercial or industrial projects.

This product line is currently under production, and it will be available soon!

HB-1 Product Image 18L
HB-1 | Protective Sealant (Gloss Finish / Wet Look)

 

Dynamatrix® HB1 Protective Sealant for Interlocking Pavers and Slabs is a high end solvent based Acrylic Sealant, it penetrates deeply into the unsealed substrate for maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear wet (glossy) look finish. Carefully blended with thermoplastic resins and refined solvents, Dynamatrix® HB1 Protective Sealant is suitable for use in all weather conditions.

 


 

HB-2 Product Image 18L
HB-2 | Protective Sealant (Satin Finish / Wet Look)

 

Dynamatrix® HB2 Protective Sealant for Interlocking Pavers and Slabs is a high end solvent based Acrylic Sealant designed to protect and enhance the look of Interlocking Concrete Pavers and Slabs. It penetrates deeply into the substrate for a maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear satin look finish. Carefully blended with thermoplastic resins and refined solvents, Dynamatrix® HB2 Protective Sealant is suitable for use in all weather conditions.

 


 

PS-1 Product Image 18L
PS-1 | Penetrating Sealant (Invisible Finish / Non-Film-Forming)

 

Dynamatrix® PS-1 Penetrating Sealant is a clear and transparent sealer formulated to protect against stains, dust, dirt, water, acid rain, chemical attack, fungus, salts, UV rays, and efflorescence damage. For interior and exterior uses (UV stable), it can be applied on colored porous concrete surfaces; Interlocking Concrete Pavers, Stamped Concrete, Cementious Surfaces, Terrazzo Floors, Masonry Brick, Stucco and grout joints.

 


 

WB-1 18L Product Image 2
WB-1 | Water Based Protective Sealant (Gloss Finish / Wet Look)

 

Dynamatrix® WB-1 Sealant For Pavers and Slabs is a high end water based Acrylic Sealant specifically designed to protect and enhance the look of Interlocking Concrete Pavers and Slabs. It penetrates deeply into the substrate for a maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear wet look finish. Carefully blended with thermoplastic resins, Dynamatrix® WB-1 Sealant is suitable for use in all weather conditions with low VOC, blush resistance and low odour.

 


 

WB-2 18L Product Image
WB-2 | Water Based Protective Sealant (Satin Finish / Wet Look)

 

Dynamatrix® WB-2 Sealant For Pavers And Slabs is a high end water based Acrylic Sealant designed to protect and enhance the look of Interlocking Concrete Pavers, Slabs, Exposed Aggregate and Terrazzo Floors. It penetrates deeply into the substrate for maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear satin look finish. Carefully blended with thermoplastic resins, Dynamatrix® WB-2 Sealant is suitable for use in all weather conditions with low VOC, blush resistance and low odour.

 


 

PW-1 | Water Based Penetrating Sealant (Invisible Finish / Non-Film-Forming)

 

PW-1 is a ready-to-use, water-based silane / siloxane water repellent for concrete, natural and dimensional stone, masonry and stucco surfaces. PW-1 permits the surface being treated to breathe. It helps prevent masonry from cracking, spalling, staining and other damage related to water intrusion. It has low odor, is alkaline stable and is ready to use. Use on horizontal surfaces such as driveways, sidewalks, tile, brick, sandstone and pavers. Provides excellent protection for retaining walls, bridge pilings and other vertical areas exposed to de-icing salts.

 


 

EF-out-right-outlined
EF | Efflorescence Cleaner

 

Dynamatrix® EF Efflorescence Cleaner is a readily biodegradable acidic based cleaner specifically designed to remove efflorescence, laitance and accumulated dirt deposits on Concrete Pavers and Slabs. It prepares the surface for Dynamatrix® Protective Sealants to better penetrate and grip the surface.

 


 

GG-out-right-outlined
GG | Grease & Grime Remover

 

Dynamatrix® GG Grease and Grime Remover is a powerful degreaser capable of removing the toughest stains caused by grease, oil and organic deposits from concrete and clay pavers. Readily biodegradable and harmless for surrounding vegetation it can be used on; metals, fiberglass, granite, marble and natural stones. Dynamatrix® GG Grease and Grime Remover is part of our latest generation of products that are safer for our environment.

 


 

GS-out-left-outlined
GS | Gum, Paint & Tar Stripper

 

Dynamatrix® GS Gum, Paint and Tar Stripper is a powerful readily biodegradable stripper capable of removing the toughest stains caused by chewing gum, tar, rubber, wax and tire marks from concrete and clay paver surfaces. It works as well on metals, bricks, granite, marble and natural stone surfaces and is part of our latest generation of products that are safer for our environment.

Watch Instructional Video


 

GR-out-left-outlined
GR | Graffiti Remover (Gel Formula)

 

Readily biodegradable and non corrosive, Dynamatrix® GR Graffiti Remover is part of our latest generation of products that are safer for our environment. Dynamatrix® GR Graffiti Remover is an extremely versatile cleaner containing no CFCs that removes graffiti and stains from concrete and other surfaces.

200 AQUABAN Product Image AQUABAN 200 | Waterproofing Membrane

 

A thin Waterproofing & Anti-Fracture Membrane designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing and crack isolation membrane that bonds to a wide variety of substrates.

 


 

PS-1 Product Image 18L
PS-1 | Penetrating Sealant (Invisible Finish / Non-Film-Forming)

 

Dynamatrix® PS-1 Penetrating Sealant is a clear and transparent sealer formulated to protect against stains, dust, dirt, water, acid rain, chemical attack, fungus, salts, UV rays, and efflorescence damage. For interior and exterior uses (UV stable), it can be applied on colored porous concrete surfaces; Interlocking Concrete Pavers, Stamped Concrete, Cementious Surfaces, Terrazzo Floors, Masonry Brick, Stucco and grout joints.

200 AQUABAN Product Image AQUABAN 200 | Waterproofing Membrane


 

A thin Waterproofing & Anti-Fracture Membrane designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing and crack isolation membrane that bonds to a wide variety of substrates.

SS1-ReflectionSS1 3500 | Multi-Purpose Silicone Sealant

 

SS-1 Silicone Sealant is a 100% RTV sealant that adheres,
bonds, insulates, seals and makes gaskets. Adheres to ceramics,
wood, metals & glass.

products-5210-thumb
BONDCRETE 5210 | Type I Bonding Agent

 

A premium performance bonding agent for adhering new concrete surfaces to old concrete surfaces. It is a TYPE I bonding agent and is non re-emulsifiable. It can also be used as a concrete additive to increase the bond strength, compressive strength, flexural strength, freeze/thaw resistance and abrasion resistance of the new concrete. It is non-toxic, non-flammable and has zero V.O.C.s

 


 

products-5220-thumb
DYNACRETE 5220 | Type II Bonding Agent

 

Used for adhering new concrete surfaces to old concrete surfaces. It is a premium performing TYPE II bonding agent and is non re-emulsifiable. It can also be used as a concrete additive to increase the bond strength, compressive strength, flexural strength, freeze/thaw resistance and abrasion resistance of the new concrete. It is non-toxic, non-flammable and has no VOCs.

150 DYNAPLAN Product Image 2DYNAPLAN 150 | Premium Self-Leveling Underlayment & Topping

 

DYNAPLAN 150 is a premium self-levelling underlayment and topping. It is used to level floors prior to the installation of ceramic tile, natural stone, resilient flooring, carpet, wood and other floor coverings. It is premium quick setting high compressive strength underlayment and topping and can be applied from feather-edge to 2" (50 mm) thick in a single pour. It is a self-leveling and self-drying underlayment, topping and repair mix for interior concrete and engineer-approved floors. It offers high compressive strength, is abrasion-resistant and has a long heal time. Light foot traffic can begin after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

 


 

SL-1 Product
SL-1 | High-Performance Self-Leveling Underlayment

 

SL-1 is a high-performance quick-setting self-levelling underlayment. It is used to level floors prior to the installation of ceramic tile, natural stone, resilient flooring, carpet, wood and other floor coverings. It is a high compressive strength underlayment and it can be applied from feather-edge to 2" (50 mm) thick in a single pour. It is a self-leveling and self-drying underlayment and repair mix for interior concrete and engineer-approved floors. It offers high compressive strength, is abrasion-resistant and has a long heal time. Light foot traffic can begin after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.